Partially Filled Pipe Electromagnetic Flowmeter

Get Latest Price

Principle:	Velocity:Faraday induction; Level: Air ultrasonic；
Diameter:	DN200~3000 mm
Min. level:	10%DN
Accuracy:	Level: 2 mm; Velocity: 0.5%FS; Flow:2.5%FS;
Velocity range :	±15 m/s
Power supply:	AC220V/DC24V/DV12V

Contact Now

Product Description

Description

Features

Parameters

Description:

The partially filled pipe electromagnetic flowmeter, is a device specially designed for accurate measurement of partially filled pipe flow. Like ordinary electromagnetic flowmeters, it uses Faraday's law of electromagnetic induction to measure flow. The flow rate is measured by low-level electrode layout, and air ultrasonic liquid level measurement is integrated to achieve electromagnetic method for synchronous measurement of liquid level and flow rate in partially filled pipe state. It is especially suitable for accurate measurement of partially filled pipe flow in water supply and wastewater industries.

Features:

Full pipe flow/partial pipe flow
Electromagnetic flow velocity measurement
Ultrasonic level measurement
Optional static pressure level measurement
IP68 protection
Submersible installation

Parameters:

Product	Partially Filled Pipe Electromagnetic Flowmeter
Measuring principle	Faraday induction
Diameter	DN200~3000 mm
Min. level	10%DN
Flow accuracy	2.5%FS
Velocity range	±15 m/s
Velocity resolution	0.01 m/s
Velocity accuracy	0.5%FS
Level Sensor	Air ultrasonic (other, customizable)
Level accuracy	2 mm
Media	Conductivity ≥20μs/cm
Operating pressure	0.6MPa/1MPa/1.6MPa (option)
Operating Environment	-10~60℃，<90%RH
Measuring tube material	Stainless Steel 304
Lining material	Neoprene
Electrode	316L/Hastelloy B/Hastelloy C
Flange	Stainless Steel
Protection	IP68
Power supply	AC220V/DC24V/DV12V
Output	4-20mA/Frequency/RS485/HART/M-BUS