Wedge-shaped electromagnetic flowmeter

Get Latest Price

Principle:	Faraday induction
Accuracy :	Flow:2.5%FS; Velocity:0.5%FS; Level:0.2%FS；
Range :	0.05 ～10 m/s
Output :	4-20mA / Frequency / Pulse / RS485
Power supply:	24V DC
Protection :	IP68

Contact Now

Product Description

Description

Features

Parameters

Description:

Wedge-shaped electromagnetic flowmeter (mouse-type electromagnetic flowmeter), an electromagnetic induction flow velocity sensor based on the PDC pulse DC principle, can measure the velocity and flow rate of full pipe flow/partial pipe flow in combination with liquid level measurement. The velocity sensor adopts a spike electrode design, which can effectively reduce the contamination of the electrode. The wedge-shaped electromagnetic flow velocity sensor is installed at the bottom of the channel in an immersed manner. When the fluid conductivity is above 10µS/cm, this product can be used to measure the fluid velocity/flow rate, even if the pipe flow is not full/open channel.

Features:

Based on pulsed DC principle
Electromagnetic flow measurement
Peak electrode design, anti-pollution
Full pipe flow/partial pipe flow measurement
IP68 protection
Immersed installation
Easy to install, can be installed directly without modification
Measurement is not affected by floating objects, sediment, etc.

Parameters:

Product	Wedge-shaped electromagnetic flowmeter
Applicable scenarios	Full pipe flow, Open channel
Measuring principle	Faraday induction
Flow accuracy	2.5%FS
Range	0.05 ～10 m/s
Velocity accuracy	0.5%FS
Level accuracy	0.2%FS
Operating Environment	-20～ 50℃
Output	4-20mA / Frequency / Pulse / RS485
Communication	RS485 / M-Bus
Power supply	24V DC
Power consumption	≤10W
Sensor protection	IP68
Cable	Standard 10 m (customizable)
Installation	Immersion