Turbidity / TSS sensor

Get Latest Price

Principle :	Infrared scattering principle
Output:	RS485，Modbus-RTU
Power supply:	12~24VDC
Accuracy:	5%Rd / 0.3NTU (whichever is greater)
Range:	Turbidity: 0.01~1000NTU (4000NTU, optional) ; TSS: 1~3000mg/L ;
Max. pressure:	≤4bar

Contact Now

Product Description

Description

Features

Parameters

Description:

The digital turbidity sensor is based on the 90-degree infrared scattering method of ISO7027 standard, and measures the sample turbidity value according to the scattered light intensity of suspended particles in the water sample. The sensor uses an LED infrared scattering light source (860nm), which will not affect the measurement results even if there is color in the sample. The unique protective structural design of the sensor detection surface can protect the sensor detection window to the greatest extent and avoid accidental collision damage to the sensor measurement surface during installation and use.

Features:

Plug and Play on site
Stable data, reliable performance
Integrated built-in humidity sensor
Integrated light source self-tester
With self-diagnosis function
Maintenance reminder function;
Protection level IP68
Internally stores calibration data, supports offline calibration
RS485 digital interface, Modbus communication protocol

Parameters:

Product	Turbidity / TSS sensor
Principle	Infrared scattering principle
Range	Turbidity: 0.01~1000NTU (4000NTU, optional) ; Suspended matter: 1~3000mg/L ;
Resolution	0.01NTU 或 1mg/L
Accuracy	5%Rd / 0.3NTU (whichever is greater)
Output	RS485，Modbus-RTU
Compensation	Humidity warning
Calibration	Solution multi-point calibration; comparison deviation correction, factor correction
Operating pressure	≤4bar
Sample velocity	No restrictions
Operating temp.	0～50℃
Storage temp.	-10℃～60℃
Material	316 stainless steel/titanium alloy+POM
Size	ø 52 × 260 mm
Installation	Horizontal installation, dedicated 90° installation accessories
Lead interface	M16
Power supply	12~24VDC
Power consumption	0.6W
Protection	IP68