Conductivity / Salinity / TDS sensor (2-electrode)

Get Latest Price

Principle :	Electrode Potentiometry
Output:	RS485 (Modbus protocol)
Power supply:	12~24VDC
Accuracy:	±1%FS
Range:	EC: 0~10mS/cm; TDS:0~5g/L; Salinity: 5ppt; Temp: 0~50℃;
Max. pressure:	Split Type ≤1bar / All-in-one Type≤6bar

Contact Now

Product Description

Description

Features

Parameters

Description:

Digital conductivity sensor, based on electrode potential method, uses industrial-grade electrodes. The conductivity sensor developed based on the digital sensing platform uses a two-pole conductivity electrode. The current can be measured by applying voltage to the two poles. The conductivity can be calculated through the voltage/current measurement value and the water sample temperature compensation algorithm. With RS485 output, standard MODBUS protocol, and support for various terminal networking.

Features:

On-site plug and play
Integrated structure/split structure
* Split, removable measuring mechanism
Matching cleaning nozzle
Protection level IP68
Electrical isolation interface, anti-interference
Internally store calibration data, support offline calibration
RS485 digital interface, Modbus communication protocol

Parameters:

Product	Conductivity / Salinity / TDS sensor (2-electrode)
Structure	Split Type	All-in-one Type
Principle	Electrode Potentiometry
Range	EC: 0~10mS/cm; TDS:0~5g/L; Salinity: 5ppt; Temp: 0~50℃;
Resolution	EC: 0.01μS/cm; TDS: 0.01mg/L Salinity: 0.01%;Temp: 0.1℃
Accuracy	±1%FS
Output	RS485 (Modbus protocol)
Temp. compensation	Automatic measurement and compensation
Operating pressure	≤1bar	≤6bar
Calibration	Standard solution multi-point calibration; comparison deviation correction; factor correction
Sample velocity	No restrictions
Operating temp.	0～50℃
Material	316L /Titanium, POM	PPS
Power supply	12~24VDC
Power consumption	0.2W
Protection	IP68
Weight	550g	220g
Size	ø 38 × 270 mm	ø 35 × 280 mm
Installation	Submerged and pipeline