Tipping Bucket Rain Gauge

Get Latest Price

Principle :	Tipping bucket type
Diameter :	Φ 200mm
Rainfall intensity :	≤4mm/min (maximum rainfall intensity allowed is 8mm/min)
Accuracy:	0.1mm
Output:	Reed switch on/off signal (PI) / RS485 (option)
Power supply:	24V DC

Contact Now

Product Description

Description

Features

Parameters

Description:

Tipping bucket rain gauge, rainwater enters the water receiver from the water receiving port, falls into the water receiving funnel, and flows into the tipping bucket through the funnel mouth. When the accumulated water reaches a certain height (such as 0.01 mm), the tipping bucket loses balance and overturns. And every time the tipping bucket tips over, the switch connects the circuit and sends a pulse signal to the recorder. The recorder controls the self-recording pen to record the rainfall, and so on. The rainfall is measured by recording the number of pulses.

Features:

Funnel anti-blocking design
Excellent support system, low resistance
Tip bucket flips sensitively and stably
Made of stainless steel, sturdy and durable
Resolution can reach 0.1mm
Small error in water retention at the water receiving port
Chassis level adjustment bubble, auxiliary leveling
Fully automatic, unattended

Parameters:

Product	Tipping Bucket Rain Gauge
Measuring principle	Tipping bucket type
Water receiving diameter	Φ 200mm
Cutting edge angle	45°~50°
Rainfall intensity	≤4mm/min (maximum rainfall intensity allowed is 8mm/min)
Resolution	0.1mm/0.2mm/0.5mm (option)
Accuracy	0.1mm
Output	Reed switch on/off signal (PI) / RS485 (option)
Operating temperature	0~60℃
Operating humidity	0～100%RH
Power supply	24V DC
Material	Stainless steel